Zodra mijn sodaq one v3 in een gebouw (géén gps) wordt opgestart en bijvoorbeeld een half uurtje later naar buiten wordt verplaatst duurt het erg lang voordat hij gps heeft.
Hij krijgt dan pas gps zodra hij gereset wordt.
Kan ik iets in de sodaq one veranderen zodat dit sneller gaat (zie huidige settings hieronder)?
GPS
GPS (OFF=0 / ON=1) (gps=): 1
Fix Interval (min) (fi=): 1
Alt. Fix Interval (min) (afi=): 0
Alt. Fix From (HH) (affh=): 0
Alt. Fix From (MM) (affm=): 0
Alt. Fix To (HH) (afth=): 0
Alt. Fix To (MM) (aftm=): 0
GPS Fix Timeout (sec) (gft=): 5
Minimum sat count (sat=): 4
Num Coords to Upload (num=): 1
On-the-move Functionality
Acceleration% (100% = 8g) (acc=): 0
Acceleration Duration (acd=): 0
Fix Interval (min) (acf=): 1
Timeout (min) (act=): 10
LoRa
OTAA Mode (OFF=0 / ON=1) (otaa=): 1
Retry conn. (OFF=0 / ON=1) (retry=): 1
ADR (OFF=0 / ON=1) (adr=): 0
ACK (OFF=0 / ON=1) (ack=): 0
Spreading Factor (sf=): 7
Output Index (pwr=): 10
Lora Port (lprt=): 1
DevAddr / DevEUI (dev=): 0000000000000003
AppSKey / AppEUI (app=): 0000000000000003
NWSKey / AppKey (key=): 00000000000000000000000000000003
Repeat Count (rep=): 0
Misc
Cayenne LPP (OFF=0 / ON=1) (cay=): 0
Temperature Sensor Offset (temp=): 20
Status LED (OFF=0 / ON=1) (led=): 1
Debug (OFF=0 / ON=1) (dbg=): 0
Enter command:
Settings: